Microcom 814M Programming Manual Manuel d'utilisateur télécharger pdf (Page 12)

n = 9: Transmit PRST status.

n = 10: Reset printer

n = 11: Clear printer errors.(function as the clear errors command)

[Notes] When n is out of range, the return value is invalid.

 The printer transmits specified status immediately upon receiving this command

 Even though the printer is not selected using ESC = (select peripheral device), this command

is still effective.

 The printer transmits the status without confirming whether the host computer can receive

data.

 This command is only valid for serial, USB and Ethernet interfaces.

 The reset command is used to clear the error status and the print buffer. Do not attempt to

print while using this command.

n = 2, Transmits printer status defined as below:

Bit Off/On Hex. Description

0 0 0 Fixed to 0

1 1 2 Fixed to 1

2 0/1 00/04 Top cover closed / Top cover open

3 0/1 00/08 No FEED button action / FEED button action

4 1 10 Fixed to 1

5 0/1 0/20 Paper adequate / Paper end

6 0/1 00/40 Normal / Error

7 0 00 Fixed to 0

n=3, Transmits error status defined as below:

Bit Off/On Hex. Description

0 0 00 Fixed to 0

1 1 02 Fixed to 1

2 0 00 Fixed to 0

3 0/1 00/08 Cutter normal / Cutter error

4 1 10 Fixed to 1

5 0/1 00/20 Top cover closed / Top cover open

6 0/1 00/40

Print head temperature normal / Print head

overheated

7 0 00 Fixed to 0

n=4, Transmits paper roll sensor status defined as below:

Bit Off/On Hex. Description

0 0 00 Fixed to 0

1 1 02 Fixed to 1

2 0/1 00/04 Paper adequate / Paper near end

3 0/1 00/08 Paper adequate / Paper near end

4 1 10 Fixed to 1

5 0/1 00/20 Paper adequate / Paper end

6 0/1 00/40 Paper adequate / Paper end

7 0 00 Fixed to 0

n = 5, Transmits printer status defined as below:

Bit Off/On Hex. Description

0 0/1 00/01 Paper adequate / Paper near end

1 1/1 00/02 Top cover closed / Top cover open

2 0/1 00/04 Paper adequate / Paper end

3 0/1 00/08 Print head normal / overheated

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 101 102

Commentaires sur ces manuels

Pas de commentaire

Microcom 814M Programming Manual Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Microcom 814M Programming Manual