Microcom 400 Manuel de l'opérateur télécharger pdf (Page 29)

Chapter 4 Designing Labels Using LDS

400 Operators Manual

FEED DIRECTION

.125" OR 25 DOTS

THIS IS THE GAP VALUE

3" OR 600 DOTS LSY

THIS IS 0,0

MICROCOM

4" OR 800 DOTS LSX

X BEGINNING

Y BEGINNING

.0625" OR 12 DOTS

THIS IS THE WEB VALUE

4.4 LABEL HEADER

The header consist of eleven parameters. These parameters contain information about the label.

It is not necessary to enter information for all of the parameters: If a parameter is left blank, then

the default value will be used. A carriage return must follow the label header parameters.

The value of measurement for many of the header elements is the dot. There are 203 dots per

inch on a 400 print head (8 dots/mm). There is a maximum 832 dots in the X direction (width). The

Y direction (length) is virtually unlimited.

Most header parameters can be supplied using the auto-size command. (See section 5.3.3.)

Below is a list of the header element mnemonics and default values:

HFM, LSX, LSY, WEB, GAP, DPS, LCB, AGD, SPG, OFX, OFY

0, 832, 614, 13, 24, 35, 0, 1, 479, 0, 0

Label Header Parameters of a 4" X 3" Label

Figure 8

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

Pas de commentaire

Microcom 400 Manuel de l'opérateur Page 29