Microcom 814M Spécifications télécharger pdf (Page 54)

ｍ

Printing position Processing of digits less than those specified

0,48 Align right Adds spaces to the left

1,49 Align right Adds 0 to the left

2,50 Align left Adds spaces to the right

[Notes] • If n or m out of the defined range, the previously set print mode is not changed.

• If n =０,ｍdoes not have any meaning.

[Default] n = 0, m = 0

[Reference]

GS C 1, GS C 2, GS C, GS c

[Examples]

GS C 1 aL aH bL bH n r

[Name] Select count mode (A)

[Format] ASCII GS C 1 aL aH bL bH n r

Hex 1D 43 31 aL aH bL bH n r

Decimal 29 67 49 aL aH bL bH n r

[Range] 0 ≤ aL ≤ 255

0 ≤ aH ≤ 255

0 ≤ bL ≤ 255

0 ≤ bH ≤ 255

0 ≤ n ≤ 255

0 ≤ r ≤ 255

[Description] Select a count mode for the serial number counter.

• aL, aH bL, bH specify the counter range.

• n indicates the stepping amount when counting up or down.

• r indicates the repetition number when the counter value is fixed.

[Notes] Count-up mode is specified when

[ aL + aH 256] < [ bL + bH 256] , n 0 and r 0.

 Count-down mode is specified when

[ aL + aH 256] > [ bL + bH 256] ,n 0 and r 0.

 Count stop when

[ aL + aH x 256] = [ bL + bH x 256] , n = 0 or r = 0.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 101 102

Pas de commentaire

Microcom 814M Spécifications Page 54