Microcom 412 Manuel de l'opérateur télécharger pdf (Page 29)

Chapter 4 Designing Labels Using LDS

412 Operators Manual

4.4 LABEL HEADER

The header consist of eleven parameters. These parameters contain information about the

label. It is not necessary to enter information for all of the parameters: If a parameter is left

blank, then the default value will be used. A carriage return must follow the label header

parameters.

The value of measurement for many of the header elements is the dot. There are 203 dots per

inch on a 412 print head (8 dots/mm). There is a maximum 832 dots in the X direction (width).

The Y direction (length) is virtually unlimited.

Most header p

arameters can be supplied using the auto-size command. (See section 5.3.3.)

Below is a list of the header element mnemonics and their default values:

HFM,LSX,LSY,WEB,GAP,DPS,LCB,AGD,SPG,OFX,OFY

0,832,614, 13, 24, 35, 0, 1,478, 0, 0

Label Header Parameters of a 4" X 3" Label

Figure 7

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 107 108

Pas de commentaire

Microcom 412 Manuel de l'opérateur Page 29