Microcom 322M Manuel de l'opérateur télécharger pdf (Page 40)

Designing Labels Using LDS Chapter 5

36 322M Operator’s Manual

5.6.7 FO (Field Orientation)

This parameter defines the rotation of the format field on the label. The point of rotation is

determined from the Field Justification parameter.

0 0 degrees (normal rotation)

1 180 degrees (upside-down rotation)

2 90 degrees (left rotation)

3 270 degrees (right rotation)

5.6.8 FJ (Field Justification)

This parameter defines the justification of the format field on the label.

0 Left Justified above the base-line

1 Right Justified above the base-line

2 Left Justified below the base-line

3 Right Justified below the base-line

4 Centered above the base-line

5 Centered below the base-line

Table 12 shows how to obtain the proper character placement or starting positions relative

to the format field’s orientations and justifications.

ROTATION FIELD ORIENTATION and JUSTIFICATION

0 & 180 Degrees

0 – Left justified above the base-line

1 – Right justified above the base-line

2 – Left justified below the base-line

3 – Right justified below the base-line

4 – Centered above the base-line

5 – Centered below the base-line

90 & 270 Degrees

0 – Left justified above the base-line

1 – Right justified above the base-line

2 – Left justified below the base-line

3 – Right justified below the base-line

4 – Centered on the Y axis, right of X coordinate

5 – Centered on the Y axis, left of the X coordinate

Table 12 FO & FJ Character Starting Positions

5.6.9 CMX (Character Multiplier X Direction)

The CMX parameter multiplies each character in the X direction. The valid range is 1 to

65536. For bar codes with a FO of 0 & 180 degree rotation, the CMX would be the

multiplier while the CMY would be the actual height in thermal dots. For bar codes with a

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 119 120

Pas de commentaire

Microcom 322M Manuel de l'opérateur Page 40